History

    15/09/2006 - ver 2.00 - Beta

      Added:   Enigma2 (7025) Support for DVBS2,Cable and Terrestrial.
      Added:   Copy/Paste one or more lists/services from one settings to another.
               Powerful copy/paste operations, when pasting Dreamset will
               add services which are missing. You can combine services/lists
               from various settings available in net like vhannibal, likra etc
               in order to make your own settings.
               When paste at services panels, dreamset will paste all services are
               available in clipboard.
               When paste at lists panels, if clipboard contains lists then these lists
               will added, if clipboard  contains only services then a list will added
               named 'clipboard' with available clipboard services.
      Added:   'Select All' option in popup menus to select all lists or services.
      Added:   The popup menu for services now contains in 'Set Service(s)Attribute'
               sub menu all the available flags which supported for service according
               to setting format. Also the option 'Clear Pids' is available.
      Added:   New properties dialog for Services/Transponders/Satellites/Lists.
      Added:   You can enable/disable tv screen message when DreamSet reads/writes settings
      Added:   Dreambox IP may contain up to 128 characters in order to let users write
               address other than numeric IPs like dyndns hosts.
      Update:  Internal Dreamset structures for better conversion between supported formats.

      Added:   Neutrino Plus images:
               - Added -Diseqc port configuration for satellites
                 Dreamset applies your configuration automatically when you transfer/write
                 your setings to box.
               - Added - Tv screen messages when DreamSet reads/writes settings
               - Added - Pids
               - Fix   - Convertion from other formats
      Note:
               SAVE: Changed the logic which DreamSet saves settings to disk, when press 'Save'
               Dreamset saves settings in their loaded format and not in the active confguration
               format as was in prior versions. If you want to save settings in a different
               format choose 'Save As' and select output type from 'File type' in Save dialog.

               TRANSFER: When you transfer settings, Dreamset auto converts loaded settings
               to active's configuration format, that means if your active configuration is
               'Neutrino' and you have load Enigma settings Dreamset will convert them
               temporary to 'Neutrino' format before transfer them to box.

    25/02/2006 - ver 1.64
      Added:   Support for DM7025.
      Added:   You can define your favorite program for Ftp,telnet and Http (use setup dialog).
      Added:   At commands menu added optrion to start VLC. VLC will play the active service.
               Parameters for vlc are taken from WebIf interface. Also you can define VLC.exe
               program location at Setup. This option is only available for Enigma 1 images.

    29/01/2006 - ver 1.63
      Update:  Increase size of internal structures to hold more elements.
      Added:   Configuration Name at status bar.
      Fixed:   Delay when sorting.services.
      Fixed:   Incorrect sorting by sat position
      Fixed:   Temporary files did not removed after executing Telenet/Http commands.

      Dreamset is available for 32bit windows and for 64bit windows.
      Download version according in your Windows platform.

    06/01/2006 - ver 1.62
      Fixed.   Multiple Box configuration

    30/12/2005 - ver 1.61 final
      Added.   Multiple Box configuration. Now you can define more than one
               boxes and switch between them with one click.
      Added.   At Setup->Preferences, option to start Dreamset minimized to tray with
               windows startup.
      Fixed.   Triple Dragon, trasponder properies, nid and tid attributes was incorrect.
      Fixed.   Neutrino, you can set DiseqC port for satellite at
               'Edit Settings' -> 'Satellite Properties'
      Updated. dreamset.dnl with more Satcodx positions (thanks EnoSat)
      Updated. mmedit.db, updated info for bouquets and services from LyngSat web pages.

    10/11/2005 - ver 1.61.rc4
      Added.  "Send it to tray".
      Added.  Port specification for ftp, telnet

    14/05/2005 - ver 1.60
      Added.  TripleDragon Settings support: Read/Write/Save/Open/Edit.
              Go to setup and select as firmware 'TripleDragon'.
      Added.  Enigma images: Option in setup dialog to auto creates bouquets from providers like
              enigma software does.
      Added.  Enigma images: Parental Lock at Bouquets.

    27/02/2005 - ver 1.59 (final)
        Fixed.  Neutrino NPlus format ( output Non Latin Ansi characters)
        Added.  DreamSet plugin compiled against new 109 images.
                User having 109 images, remove old dreamset files from plugins directory.
        Added.  Action 'Remove Channels from User/Bouquets List' can be aplied to more than one service.
        Fixed.  Other minor bugs.

    10/02/2005 - ver 1.59rc1 (beta version)
        Added.  Supports new Neutrino NPlus format. Before upload new settings go to setup
                dialog and select 'Neutrino NPlus' as firmware.
                I have done a couple of tests, if you cannot reload your settings, send your
                settings to my email to check them out.
                Always after settings transfer, go to Neutrino Menu, choose 'Service' and
                then select 'Reload Channel List'.

    06/02/2005 - ver 1.58
        Added.  Data services in 'TV All' list, moved to separate list called 'Data all'.
        Added.  View/Import (not edit) Triple Dragon settings.
                Dreamset auto loads favourites.txt if exists, otherwise prompts user for
                favourite lists file.
        Change. Dreamset Plugin protocol (plugin does not work with new beta ver 109).

    10/11/2004 - ver 1.57:
        Fixed.  DiseqC Commands, remember latitude,longtitude and last goto xx.x entry.
        Fixed.  Blind Search, Scan Method.
        Fixed.  Blind Search, 'Save Results' button now prompts user where to save the output.
        Added.  Blind Search, Reset button to return to predefined SR values.
        Fixed.  Writting Bouqeuts.
        Fixed.  Old Neutrino v1 (used by dbox users only), fec (5/6,7/8) problems at services.xml.

    31/10/2004 - ver 1.56:
        Fixed.  Limit 256 transponders per network/provider.
        Added.  Updated Signal Meter dialog.
                a. Full motor diseqc commands support.
                   You can move your dish, alter internal satellite table,
                   use goto xx.x function
                b. Tune to frequency
                   Pass freq, SR, FEC, POL press tune and check the signal for
                   lock.
                c. Blind search (expiremental)
                   Just tried out !
                   Results are saved in dat format (text base format)
                   and holds scramble flag. When open this file by using Dreamset
                   you will prompted to specify the orbital position and direction for
                   the satellite you scaned, place these value and press retry to the dialog.
                d. Setup for lnb and timing parameters.
                e. Support Neutrino images also
                f. Description of Dreamset plugin files included in zip file
                   dreamset.cfg  plugin configuration file same for neutrino and enigma
                   dreamset.1    Used for neutrino images as dreamset.so
                   dreamset.2    Used for neutrino images as dreamset. dreamset is
                                 an executable file (server) which is executed by neutrino
                                 dreamset.so
                   dreamset.3    Used for enigma images as dreamset.so (server + libfx lib)
                Note 1
                   Dreamset plugin "talks" directly to dreambox drivers DOES NOT call enigma
                   routines, so it is completely firmware independent, does not know your
                   dish/lnb configuration. Go to Signal Meter dialog at Setup page and choose
                   DiseqC port if you have 2/4 Diseqc switch.
                Note 2 (enigma only)
                   Enigma images tend to retune to last service after a lost of signal.
                   Before using blind search go to Dreambox Menu Automatic Transponder
                   Scan and then start Signal Meter Dialog and do your blind search.

    29/08/2004 - ver 1.55:
    	Added.  A quick update to support the new Neutrino Settings format.
    	        Go to setup and select Neutrino_v2 as firmware. Please note
    	        that non latin characters does not suported by new settings,
    	        all non latin characters are converted to underscore (_)
    	        character. Convertion from old to new format is made
    	        automatically, just load and write.

    01/08/2004 - ver 1.54:
        Fixed.  Export lists with markers.
        Fixed.  Split lists to markers.
        Update. Read DVB settings
        Update. --- DreamSet Plugin -----
                Sends signal information to DreamSet program.
                Plugin does not apears to plugins list, because
                there is no reason to started manualy, it automatically
                started from DreamSet editor. To exit plugin press LAME
                button. Also plugin auto closes when signal meter dialog in
                DreamSet editor is closing. Please note, you dont have to
                install the plugin manually using an ftp program, DreamSet
                windows program will check for installation/version and
                will ask you if you want to install/update plugin.
                Tested on Official firmware 108.
                Plugin uses port 6546.
                Report bugs to vioannis@yahoo.com

    07/07/2004 - ver 1.53:
        Fixed.  Markers block services to be displayed.
        Added.  DiseqC port in Satellite Properties for
                Neutrino Settings.

    23/06/2004 - ver 1.52:
        Added.  Http Authentication for enigma images
        Added.  Http port in Setup Dialog
        Added.  Create lists from networks/providers

    16/06/2004 - ver 1.51:
        Fixed.  Write Neutrino Settings.
    	        Fixed some bugs for special characters in xml format, now
    	        you can transfer enigma settings directly. Please note that
    	        Neutrino Settings convertion may still have some bugs, in
    	        case your settings cannot be transfered to neutrino format,
    	        mail the settings to me to improve Dreamset routines.

    11/06/2004 - ver 1.50:
        Added.  Neutrino Setting support.
                Go to setup dialog and select Neutrino firmware.
                Transfer and Save (As) output settings in Neutrino format.
                After write, you have to execute reload settings in neutrino
                services menou, Note that features like Markers and signal
                meter does not supported in Neutrino.
        Added.  Dreambox Registry Editor (for advanced users only).
                Supports full editing (insert/edit/delete nodes, keys values) and
                Import/Export operations.
        For bugs,suggestions mail at vioannis@yahoo.com.

    03/05/2004 - ver 1.49:
        Added.  Split list to markers.
        Added.  Arrange Lists (Place tv lists first, and radio at the end)
        Added.  SortLists by Name/Type (Groups lists by type(tv,radio)
                and short each group by list name)
        Update. When pressing Signal Meter, program check and auto
                installs dreamset plugin if need it.
        Update. Read/Write settings procedure (Multithreaded to avoid program freezing).

    03/04/2004 - ver 1.48:
        Added.  Reading Neutrino(dbox2) settings.
                You can open neutrino setting and write them in your box
                like dreambox settings.
        Added.  Two more option in services popup menu,
                a)Remove service from all user lists and
                b)Remove service from all bouquet lists
        Added.  Firmware 107.4 in Setup Dialog ( satellites.xml at /var/etc )
        Fixed.  Drop services in lists/bouquets windows when no list(s) exists

    03/03/2004 - ver 1.47:
        Added.  Tooltips over list/bouquet and service items.
                (you can disable this feature from setup dialog)
        Fixed.  Reading satellites.xml
        Added.  Signal Meter dialog (EXPERIMENTAL tested on 107.3 firmware)
                Just install* Dreamset plugin to your box and press
                signal meter button in DreamSet windows program.

                *Copy from dreamset zip file the dreamset.so & dreamset.cfg
                to /var/config/tuxbox/plugins

    10/02/2004 - ver 1.46a:
    	Fixed.  Edit satellites properties.
    	Fixed.  System Lists control did not show contents after cancel pressed in
    	        Search All dialog.

    09/02/2004 - ver 1.46:
    	Added.  Extended Markers support (user list services popup menu):
    	          Insert marker, Auto markers through sort services dialog,
    	          Remove all markers from a list, Remove all markers from settings
    	Added.  Sort dialog supports also sorting by Provider/Network name
    	Update. A bit more quick settings loading time.
    	Update. Write settings routine.

    25/01/2004 - ver 1.45:
    	Added.  -Send the following commands to DreamBox from Dreamset:
    	         Shutdown, reboot, restart, standby, wakeup
    	        -Start Ftp,Http using Internet Explorer and telnet session
                     using windows telenet program.
                    (all the above in the 8th toolbar button )
    	Added.  Channel properties now contains a flag to mark the channel
    	        as free or scramble (internal use).
    	Added.  Organize lists, new option in lists popup menu
    	        Create a list with new channels (from last import or last
    	        service scan you made in your dreambox, before use that service
    	        just read and write back your setting. This is need it to be done
    	        only once on first usage of Dreamset ver 1.45).

    16/01/2004 - ver 1.44:
    	Fixed.  Pressing F3 of Ctrl+F to search make program to crash.
    	Update. MMEdit.db (database with 2901 services (Encryption+Pids+Provider)

    06/01/2004 - ver 1.43:
    	Added.  In Search All Dialog, search based on services attributes,
    	        for example you can get a list of all parental locked services.
    	Added.  Service popup menu, has option to set/unset attributes like
    	        Fixed Name, Parental Lock, Hide Service.
    	Added.  Setup dialog, contains firmware selection to auto setup folder location.
    	        Firmware definition files have an extension .frm and are ini files, so
    	        you can create your own file (using a text editor) depend on the
    	        firmaware you have.
    	        Also 'Check connection' button added.
    	Fixed.  Sorting channels in all selected lists, and not only in active one.

    16/12/2003 - ver 1.42:
    	Added.  Color notation in empty lists.
    	Added.  Search All function (lists only matched services)
    	Added.  View services filter (Tv, Radio, Data)
    	Added.  Setup Dialog: Folder location of satellites.xml and services.
    	Fixed.  Export Lists
    	Fixed.  Import Lists
    	Fixed.  Delete services
    	Update. Help file.

    08/12/2003 - ver 1.41:
    	Added.  Remeber application window position and at Organize Lists page the size of list controls.
    	Added.  Organize Lists page: Find/Find Next functions.
    	Fixed.  Internal errors.
    	Updated.MMEdit.db (Packages Database)

    04/12/2003 - ver 1.40:
    	Added. First Release of a Complete new User Interface to Organize
    	       Lists and Bouquets.
    	Added. Sorting List Channles by Satellite position (usefull for motorized system)

    26/10/2003 - ver 1.30:
    	Fixed. Switch to channel by double click a service.
    	Update.Improve speed of Export Lists operation.
    	Added. Displaying Unicode Characters.
    	Added. Update satellite transpoder list from loaded settings.
    	Added. Setup Dialog: Update satellites transpoder list methods (add non existing or mirroring).
    	Added. Setup Dialog: Auto update satellites transpoder list (satellite.xml) at save or write.
    	Added. Setup Dialog: Auto load last used files at start up.

    08/10/2003 - ver 1.21:
    	Fixed. Reload Settings and Reload Bouquets commands.
    	Added. TV Screen message about transfer progress.

    21/09/2003 - ver 1.20:
    	Added. Parental Lock flag in Channel Properties
    	Added. Passive Ftp Transfers
    	Fixed. User Interface and other minor bugs.

    30/08/2003 - ver 1.01:
    	Major Bug Fixes.

    29/08/2003 - ver 1.00p2:
    	Second Prelease.

    24/08/2003 - ver 1.00p:
    	First Prelease.